Description
An acrylic based coating designed for the restoration of Alexander Rose
Sherwood furniture where the finish has become damaged, weathered or
worn off.
PLEASE NOTE THAT WHILE WE HAVE TRIED OUR BEST TO ACHIEVE A COLOUR MATCH TO THE FACTORY SHERWOOD FINISH, THERE MAY BE A VARIATION IN COLOUR. WE RECCOMMEND TREATING THE ENTIRETY OF YOUR FURNITURE TO ACHIEVE THE BEST UNIFORM RESULT.
Preparation
Ensure timber surface is free from dirt and loose material. Lightly rub down
surface with fine sandpaper to ensure even adhesion.
Application
Application should take place in dry conditions and should be protected
from rainfall for at least 24 hours. Sherwood Treatment can be applied
using either a fine brush or short fibre roller. Avoid over applying the
product as this will cause surface saturation and may lead to prolonged
drying and excessive sheen. For best results, 2 coats of finish can be
applied, leaving 2-3 hours drying time between coats.
Coverage
When applied as a thin coat, Sherwood Treatment will cover at the
maximum rate of about 500ml per 4 to 6 square metres, either by brush
or by fine roller
